Indoor Power Signal Management Interface
PowerGate Solid is a multifunctional converter for transmitting DMX signals (PWRDMX technology) over power lines.
PowerGate Solid supports communication based on PWRDMX, DMX512, RDM (ANSI E1.20), ArtNet (1, 2, 3, 4), sCAN (Draft, Release), KiNet (v1, v2), RTTrPL, and Ethernet in various signal reception/transmission combinations over power lines (up to 400 meters in length) and Ethernet network.
The unit is powered via 110/220 V AC power lines.
Additional Ethernet equipment connects through the integrated 10/100 Mbps port.
The hardware can be configured through the web interface, the ArtGate Setting utility, third-party software that supports the ArtNet protocol, or ARISTO software.
PowerGate Solid is designed to operate in temperatures above zero, whether in indoor or outdoor areas. The vandal-resistant duralumin housing with an IP44 rating can be mounted on a bracket or on a vertical or horizontal surface.
DMX Bi-Direct
DMX Bi-DirectBidirectional DMX network, faultless conversion in both ways
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Highest Ingress Protection
Highest Ingress ProtectionTested for outdoor use: IP65 class, protected from total dust ingress and low pressure water jets from any direction
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
Use existing power lines to transmit DMX streams
Ethernet port for web configuration and ArtNet/sACN data transmission
Minimal charging time, faster recovery after a brief power failure
Complete protection against dust and smoke, extending product lifespan
Full galvanic isolation of all ports
Simple and user-friendly web interface
IP44 enclosure
Maximum surge protection (100-315 V)
All relevant industry-standard protocols such as Art-Net, sACN, KiNET, RTTrPL (Blacktrax), PWRDMX, DMX512 and RDM are supported
- Mechanical
Enclosure: vandal-resistant
Material: metal, plastic
Dimensions, mm: 182 (L) x 59,4 (H) x 121 (W)
Weight: 1.2 kg
Installation: surface, truss- Power & Electrical
Power supply: ~ 100-250 V, 50/60 Hz
Max power consumption: 5W
Fuse: 0.5 A- Environment
Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 44
Certificates: CE compliant, RoHS
Warranty: 36 months- Inputs / Outputs
DMX ports: 1 or 4
DMX connectors: 1 or 4 XLR(3/5)M, 1 or 4 XLR(3/5)F
Ethernet port: 1 (10/100 Base-TX)
Ethernet-connectors: RJ-45/etherCON
- Control / Data Connections
Supported protocols: DMX512, RDM, ArtNet (1,2,3,4), sACN (Draft, Release), KiNet (v1, v2), RTTrPL
Refresh rate DMX data: 44 Hz
Ethernet: ArtNet/sACN- Configuration / Indication
Configuration: web interface, ArtGate settings
Indicators: LED, for DMX and Ethernet
- Package Contents
PowerGate Solid
- PowerGate Solid, 2 DMX (3-pin)
- PowerGate Solid, 2 DMX (5-pin)
- PowerGate Solid, 4 DMX (3-pin)
- PowerGate Solid, 4 DMX (5-pin)
- PGS-3-2DE
- PGS-5-2DE
- PGS-3-4DE
- PGS-5-4DE
- 5060452245188
- 5060452245195
- 5060452245201
- 5060452245218
