Professional Waterproof Lighting Control Solution for Outdoor Installations
ArtGate Arma is a smart Ethernet/DMX converter with merging and data backup functions. It is designed to control DMX512 based lighting equipment.
ArtGate Arma supports DMX512, RDM (ANSI E1.20), ArtNet (1, 2,3, 4), sCAN (Draft, Release), KiNet (v1, v2), RTTrPL and Ethernet based communication in a variety of signal receive/transfer combinations via Ethernet connection.
The device can be powered (for redundancy purposes) either in parallel from 110/250 V mains or via PoE (Power over Ethernet according to IEEE 802.3af standard).
Additional Ethernet equipment is connected via the integrated two-port 10/100 Mbps switch.
The hardware can be configured via the web interface, ArtGate Setting utility, third-party software supporting the ArtNet protocol or ARISTO software.
ArtGate Arma is designed to be installed indoors or outdoors. It can be installed on vertical or horizontal surfaces, or on a special bracket. The unit can operate at positive or negative temperatures. The duralumin enclosure provides protection against dust and moisture in accordance with IP65.
DMX Bi-Direct
DMX Bi-DirectBidirectional DMX network, faultless conversion in both ways
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Highest Ingress Protection
Highest Ingress ProtectionTested for outdoor use: IP65 class, protected from total dust ingress and low pressure water jets from any direction
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
Power over Ethernet
Power over EthernetPoE 802.3af mode A, B: network cable may carry power supply, only network connection may be made
2 IP adresses per Device
2 IP adresses per DeviceEach device has an additional Master IP that guarantees successful connection
User-Friendly Web Interface
User-Friendly Web InterfaceA simple web interface that works exactly as the user expects it to
- Mechanical
Housing: dust and moisture resistant
Material: metal
Dimensions, mm: 199 (L) x 55,5 (H) x 149 (W)
Weight: 0.85 kg
Installation: flat surface, clamp- Power & Electrical
Power supply: ~ 100-250 V, 50/60 Hz, PoE
Input Power (max): 5 W
Mains Fuse: 0.5 A- Environment
Operating Temperature: -40...+70°C
Storage Temperature: -50...+80°C
Operating Relative Humidity (max): 100%
IP Rating: IP65
Certificates: CE compliant, RoHS
Warranty: 36 Month- Control / Data Connections
Supported protocols: DMX512, RDM,
ArtNet I, II, III, IV, sACN draft, release, KiNet v1, v2
RTTrPL
Refresh rate DMX data: 44 Hz
- Inputs / Outputs
DMX ports: 2 or 4
DMX connectors: terminal blocks 2EDGVC-5.08-03P,
15EDGVC-3.5-03
Ethernet ports: 2 (10/100 Base-TX), PoE
Ethernet connector: ADC Krone 6048 1 090-00 connectors- Configuration / Indication
Configuration: web interface
Indicators: LED, for DMX and Ethernet- Package Contents
ArtGate Arma
Terminal Blocks
- ArtGate Arma, 2 DMX
- ArtGate Arma, 4 DMX
- AGA-M-2D2E
- AGA-M-4D2E
- 5060452244761
- 5060452244778
