Flexible DIN Rail Mounting for Stage Lighting Networks
ArtGate DIN is an intelligent Ethernet/DMX converter with merging and data backup functions. It is designed to control DMX512-based lighting equipment.
ArtGate DIN supports DMX512, RDM (ANSI E1.20), ArtNet (1, 2, 3, 4), sACN (Draft, Release), KiNet (v1, v2), RTTrPL, and Ethernet-based communication in a variety of signal reception/transmission combinations.
The device can be powered (for redundancy purposes) either in parallel from a 110/250 V power supply or via PoE (Power over Ethernet) according to IEEE 802.3af standard.
Additional Ethernet equipment is connected through the integrated 2-port 10/100 Mbps switch. In case of emergency, the converter is equipped with a dual trigger input.
The hardware can be configured via the web interface, ArtGate Setting utility, third-party software supporting the ArtNet protocol, or ARISTO software.
ArtGate DIN is designed to be installed indoors or in outdoor shelters. The unit operates in both positive and negative temperatures. It is mounted on a DIN rail and occupies 12 modules.
DMX Bi-Direct
DMX Bi-DirectBidirectional DMX network, faultless conversion in both ways
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
Power over Ethernet
Power over EthernetPoE 802.3af mode A, B: network cable may carry power supply, only network connection may be made
2 IP adresses per Device
2 IP adresses per DeviceEach device has an additional Master IP that guarantees successful connection
User-Friendly Web Interface
User-Friendly Web InterfaceA simple web interface that works exactly as the user expects it to
Trigger Input
Trigger InputPreset scenarios triggered by external events and alarms
Permanen Laser Engraving
Permanen Laser EngravingPrecision, Style, and Durability for the Entire Lifespan
Aluminum housing with non-erasable laser engraving
Maintains performance under voltages up to 305 V
Supports two Ethernet ports
Supports DMX512, ArtNet (1, 2, 3, 4), RDM (ANSI E1.20), sACN (Draft, Release), KiNet (v1, v2), RTTrPL
Profile configuration save function
Supports fixed IP address for configuration access
Intuitive web interface
Galvanic isolation on DMX ports
Supports multiple merging modes: HTP, LTP, AUTO, PRIORITY
Fanless cooling function with no need for ventilation holes in the casing
Supports two triggers
All relevant industry-standard protocols such as Art-Net, sACN, KiNET, RTTrPL (Blacktrax), DMX512 and RDM are supported
- Mechanical
Enclosure: DIN rail (12 modules)
Material: metal, plastic
Dimensions, mm: 212 (L) x 75 (H) x 105 (W)
Weight: 0.85 kg
Installation: power supply cabinet- Power & Electrical
Power supply: ~ 100-250 V, 50/60 Hz, PoE
Max power consumption: 5W
Fuse: 0.5 A- Environment
Operating temperatures: -40 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 20
Certificates: CE compliant, RoHS
Warranty: 36 months- Control / Data Connections
Supported protocols: DMX512, RDM, ArtNet (1,2,3,4),
sACN (Draft, Release), KiNet (v1, v2), RTTrPL
Refresh rate DMX data: 44 Hz
- Inputs / Outputs
DMX ports: 4 or 8
DMX connectors: terminal blocks 2EDGVC-5.08-02P,
15EDGVC-3.5-03
Ethernet port: 1 or 2 (10/100 Base-TX), PoE
Ethernet connectors: 1 or 2 RJ-45
Trigger ports: 2- Configuration / Indication
Configuration: web interface, ArtGate settings
Indicators: LED, for DMX and Ethernet- Package Contents
ArtGate DIN
Connector set
- ArtGate DIN, 4 DMX, 1 Ethernet
- ArtGate DIN, 8 DMX, 2 Ethernet, PoE
- AGD-1-4DE
- AGD-1-8D2E
- 5060452244839
- 5060452244846
