GigaJet20 Pro
GigaJet 20 Pro is a smart Ethernet/DMX converter with merging and data backup functions. It is designed to control DMX512 based lighting equipment.
GigaJet 20 Pro supports DMX512, RDM (ANSI E1.20), ArtNet (1, 2,3, 4), sCAN (Draft, Release), KiNet (v1, v2), RTTrPL and Ethernet based communication in a variety of signal receive/transfer combinations.
The device can be powered (for redundancy purposes) either in parallel from 110/250 V mains or via PoE (Power over Ethernet according to IEEE 802.3af standard).
Additional Ethernet equipment is connected via the integrated two-port 10/100/1000 Mbps switch with integrated media converter per SFP module. Four pass-through (TRUE) DMX ports are used for DMX communication. In case of emergency, the converter is equipped with a dual trigger input.
The hardware can be configured via the web interface, ArtGate Setting utility, third-party software supporting the ArtNet protocol or ARISTO software.
GigaJet 20 Pro is designed for installation in a 19" rack. The height of the converter is 2U.
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Gigabit Ethernet switch
Gigabit Ethernet switch10/100/1000 Base-TX Ethernet switch for high-speed network connectivity
Power over Ethernet
Power over EthernetPoE 802.3af mode A, B: network cable may carry power supply, only network connection may be made
2 IP adresses per Device
2 IP adresses per DeviceEach device has an additional Master IP that guarantees successful connection
User-Friendly Web Interface
User-Friendly Web InterfaceA simple web interface that works exactly as the user expects it to
Back-Up Transmitter
Back-Up TransmitterThis device may be used as a back-up transmitter to ensure fail-proof installation infrastructure
Trigger Input
Trigger InputPreset scenarios triggered by external events and alarms
Rack form factor 2U 11 cm deep with IP20 protection
Maintaining performance under voltage up to 305 V
Supports one TRUE DMX port
Supports three Ethernet ports
Supports DMX512, ArtNet (1,2,3,4) protocols,
RDM (ANSI E1.20), sACN (Draft, Release),
KiNet (v1, v2), RTTrPL
Intelligent indication of operating modes
RDM protocol filtering function (ANSI E1.20)
Save function for setting profiles
Galvanic isolation of DMX ports
Fixed IP support to access the settings
Intuitive web interface
Supports various merging modes such as
HTP, LTP, AUTO, PRIORITY
Supports one SFP module
Supports two trigger inputs for external events and alarms
Free cooling function without use fans and holes in the case
Power connector powerCON TRUE1
- Mechanical
Housing: shallow installation depth in a rack
Material: metal
Dimensions, mm: 482,6 (L) x 88,1 (H) x 125,6 (W)
Weight: 1.5 kg
Mounting: in a rack- Power & Electrical
Power supply: ~ 100-250 V, 50/60 Hz, PoE, 0.25 A, PoE
Max power consumption: 5W- Environment
Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 20
Certificates: CE compliant, RoHS
Warranty: 36 months- Control / Data Connections
Supported protocols: DMX512, RDM, ArtNet (1,2,3,4),
sACN draft, release, KiNet (v1, v2), RTTrPL
Refresh rate DMX data: 44Hz
- Inputs / Outputs
DMX ports: 20
DMX connectors: 4 XLR (5) M, 20 XLR (5) F
Ethernet ports: 3 (10/100/1000 Base-TX), PoE
Ethernet connectors: RJ-45 / etherCON
Optical connectors: 1 SFP
Trigger connectors: terminal block- Configuration / Indication
Configuration: web interface, ArtGate settings
Indicators: LED for DMX, Ethernet and SFP header- Package Contents
GigaJet20 Pro
Terminal block for connecting trigger inputs
- GigaJet20 Pro
- GJP-5-20D3EF
- 5060452244556
