ArtGate Solid
ArtGate Solid is a multifunctional converter for converting Ethernet protocols (ArtNet, sACN) to DMX512 for lighting control.
ArtGate Solid supports DMX512, ArtNet (1, 2,3, 4), sCAN (Draft, Release), KiNet (v1, v2), RTTrPL and Ethernet based communication in a variety of signal receive/transfer combinations via Ethernet connection.
The device can be powered (for redundancy purposes) either in parallel from 110/250 V mains or via PoE (Power over Ethernet according to IEEE 802.3af standard).
Additional Ethernet equipment is connected via the integrated two-port 10/100 Mbps switch.
The hardware can be configured via the web interface, ArtGate Setting utility, third-party software supporting the ArtNet protocol or ARISTO software.
ArtGate Solid is designed for operation in above-zero temperatures, either on indoor or outdoor areas. The vandal resistant IP44 duralumin enclosure can be mounted on a bracket, vertical or horizontal surface.
DMX Bi-Direct
DMX Bi-DirectBidirectional DMX network, faultless conversion in both ways
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Highest Ingress Protection
Highest Ingress ProtectionTested for outdoor use: IP65 class, protected from total dust ingress and low pressure water jets from any direction
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
Power over Ethernet
Power over EthernetPoE 802.3af mode A, B: network cable may carry power supply, only network connection may be made
2 IP adresses per Device
2 IP adresses per DeviceEach device has an additional Master IP that guarantees successful connection
User-Friendly Web Interface
User-Friendly Web InterfaceA simple web interface that works exactly as the user expects it to
Minimum loading time, fastest recovery after short power failure
Master IP that never gets lost
Integrated Ethernet switch
Natural heat convection, no fans or coolers, no vent slots – full protection from dust and smoke increases product lifetime
Maximum surge protection – power supply optimized for voltage from 100 to 315 V
Full galvanic isolation of all ports
Simple user-friendly web interface
Configurable DMX port direction
- Mechanical
Enclosure: solid case
Material: metal, plastic
Dimensions, mm: 182 (L) x 59,4 (H) x 121 (W)
Weight: 1.2 kg
Installation: surface, truss- Power & Electrical
Power supply: ~ 100-240 V, 50/60 Hz, PoE
Max power consumption: 5W
Fuse: 0.5 A- Environment
Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 44
Certificates: CE compliant, RoHS
Warranty: 36 months- Inputs / Outputs
DMX ports: 2 or 4
DMX connectors: 2 or 4 XLR(3/5/etherCON)M, 2 or 4 XLR(3/5/etherCON)F
Ethernet port: 2 (10/100 Base-TX), PoE
Ethernet connectors: RJ-45/etherCon
- Control / Data Connections
Supported protocols: ArtNet (1,2,3,4) SACN (draft, release), KiNet (v1, v2), RTTrPL
Refresh rate DMX data: 44 Hz- Configuration / Indication
Configuration: web interface, ArtGate settings
Indicators: LED, for DMX and Ethernet- Package Contents
ArtGate Solid
Connector set
- ArtGate Solid, 2 DMX (3-pin)
- ArtGate Solid, 2 DMX (5-pin)
- ArtGate Solid, 4 DMX (3-pin)
- ArtGate Solid, 4 DMX (5-pin)
- AGS-3-2D2E
- AGS-5-2D2E
- AGS-3-4D2E
- AGS-5-4D2E
- 5060452244907
- 5060452244914
- 5060452244921
- 5060452244938
