ArtGate Pro

Rack mountable Art-Net/sACN to DMX converter with up to eight optically isolated DMX ports with built-in 2-ports ethernet switch

ArtGate Pro is a smart Ethernet/DMX converter with merging and data backup functions. It is designed to control DMX512 based lighting equipment.

ArtGate Pro supports DMX512, RDM (ANSI E1.20), ArtNet (1, 2, 3, 4), sCAN (Draft, Release), KiNet (v1, v2), RTTrPL and Ethernet based communication in a variety of signal receive/transfer combinations.

The device can be powered (for redundancy purposes) either in parallel from 110/250 V mains or via PoE (Power over Ethernet according to IEEE 802.3af standard).

Additional Ethernet equipment is connected via the integrated two-port 10/100/1000 Mbps switch with integrated media converter per SFP module. Two pass-through (TRUE) DMX ports are used for DMX communication. In case of emergency, the converter is equipped with a dual trigger input.

The hardware can be configured via the web interface, ArtGate Setting utility, third-party software supporting the ArtNet protocol or ARISTO software.

ArtGate Pro is designed for installation in a 19" rack. The height of the converter is 1U.

  • DMX Bi-Direct Sundrax Entertainment Lighting Control

    DMX Bi-Direct

    DMX Bi-Direct

    Bidirectional DMX network, faultless conversion in both ways

  • Supports RDM Sundrax Entertainment Lighting Control

    Supports RDM

    Supports RDM

    Full RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system

  • UltraStart Sundrax Entertainment Lighting Control

    UltraStart

    UltraStart

    Ready device in less than 3 seconds after power supply

  • Galvanic Isolated Ports Sundrax Entertainment Lighting Control

    Galvanic Isolated Ports

    Galvanic Isolated Ports

    Full isolation of each port to create reliable protection against current surges

  • Natural Heat Convection Sundrax Entertainment Lighting Control

    Natural Heat Convection

    Natural Heat Convection

    No fans, no coolers, no vent slots - full protection from dust

  • Power over Ethernet Sundrax Entertainment Lighting Control

    Power over Ethernet

    Power over Ethernet

    PoE 802.3af mode A, B: network cable may carry power supply, only network connection may be made

  • Each device has an additional Master IP that guarantees successful connection

    2 IP adresses per Device

    2 IP adresses per Device

    Each device has an additional Master IP that guarantees successful connection

  • Friendly-UI Sundrax Entertainment Lighting Control

    User-Friendly Web Interface

    User-Friendly Web Interface

    A simple web interface that works exactly as the user expects it to

  • Trigger-Input Sundrax Entertainment Lighting Control

    Trigger Input

    Trigger Input

    Preset scenarios triggered by external events and alarms

  • Rack form factor 1U 11 cm deep with IP20 protection
    Maintaining performance at voltages up to 305 V
    Supports one TRUE DMX port
    Supports two Ethernet ports
    Supports DMX512, ArtNet (1,2,3,4) protocols, RDM (ANSI E1.20), sACN (Draft, Release), KiNet (v1, v2), RTTrPL
    Intelligent indication of operating modes
    RDM protocol filtering function (ANSI E1.20)

    Save function for setting profiles
    Galvanic isolation of DMX ports
    Fixed IP address support for access to settings
    Intuitive web interface
    Supports various merging modes HTP, LTP,AUTO, PRIORITY
    Supports two trigger inputs for external events and alarms
    Free cooling function without use fans and holes in the case
    PowerCON TRUE1power connector

Mechanical

Housing: Short 1U Rack
Material: metal
Dimensions, mm: 482,6 (L) x 43,6 (H) x 125,5(W)
Mass: 1.2 kg
Mounting: rack 1 unit

Power & Electrical

Power supply: ~90-277 VAC, 50/60 Hz,
PoE 802.15f mode A, B
Input Power (max): 5 W

Environment

Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 20
Certificates: CE compliant, RoHS
Warranty: 36 months

Control / Data Connections

Supported protocols: DMX512, RDM, ArtNet I, II, III,
IV, sACN draft, release, KiNet v1, v2 , RTTrPL
DMX refresh rate: 44 Hz

Inputs / Outputs

DMX ports: 4 or 8
DMX connectors: 2 XLR (3/5) M, 8 XLR (3/5) F
Ethernet ports: 2 (10/100 Base-TX), PoE
Ethernet connectors: RJ-45 / etherCON
Trigger connectors: terminal block
PowerCON ports: 1 (TRUE1)

Configuration / Indication

Configuration: web interface, ArtGate settings
Indicators: LED, for DMX and Ethernet activity

Package Contents

ArtGate Pro
Terminal blocks

  • ArtGate Pro, 4 DMX (5-pin)
  • ArtGate Pro, 4 DMX (3-pin)
  • ArtGate Pro, 8 DMX (5-pin)
  • ArtGate Pro, 8 DMX (3-pin)
  • AGP-5-4D2E
  • AGP-3-4D2E
  • AGP-5-8D2E
  • AGP-3-8D2E
  • 5060452244679
  • 5060452244686
  • 5060452244693
  • 5060452244709

Pro Series is special portfolio of 19'' rackmounted (or clampmounted) professional DMX transceivers, DMX to ArtNet/sACN converters with fiber optic ports available pro switches, hybrids and splitters in smalldepth lightweight metal housing.