Rack-Mountable Signal Management and Amplification Unit
Splitter Pro is a single or double channel DMX512 interface splitter. It is designed to control DMX512 based lighting equipment.
Splitter Pro supports DMX512, RDM (ANSI E1.20).
Splitter distributes the signal from 1 or 3 inputs to 5, 8 or 10 outputs, using XLR connectors (3 or 5 pins) or EtherCON. The Splitter Pro's smart indication detects the presence of a DMX512 or RDM data in the channel.
The unit is powered via 110/220 V mains.
Splitter Pro is designed for installation in a 19" rack. The height of the converter is 1U.
DMX Bi-Direct
DMX Bi-DirectBidirectional DMX network, faultless conversion in both ways
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
No buttons
Ethercon or XLR (customer request)
Time-tested in severe weather conditions
100% input data reservation
Single or double input modes
Input back up function
DMX Thru port
All relevant industry-standard protocols such as DMX512 and RDM are supported
- Mechanical
Housing: Short 1U Rack
Material: metal
Dimensions, mm: 482,6 (L) x 43,6 (H) x 125,6 (W)
Weight: 1.2 kg
Mounting: in a rack, 1 module- Power & Electrical
Power supply: ~ 100-250 V, 50/60 Hz
Max power consumption: 5W
Fuse: 0.5 A- Environment
Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: IP 20
Certificates: CE compliant, RoHS
Warranty: 36 months- Control / Data Connections
Supported protocols: DMX512, RDM, BeDMX
Refresh rate DMX data: 44 Hz
- Inputs / Outputs
DMX Inputs: 1
DMX Outputs: 5 or 10
DMX connectors: 1 XLR (3/5 / etherCON) M, 10 XLR (3/5 / etherCON) F
BeDMX ports: 1
PowerCON ports: 1 (TRUE1)- Configuration / Indication
Indicators: LED, for DMX inputs
- Package Contents
Splitter Pro
- Splitter Pro, 1 DMX inputs, 5 DMX outputs (3-pin)
- Splitter Pro, 1 DMX inputs, 5 DMX outputs (5-pin)
- Splitter Pro, 1 DMX inputs, 5 DMX outputs (etherCON)
- Splitter Pro, 1 DMX inputs, 10 DMX outputs (3-pin)
- Splitter Pro, 1 DMX inputs, 10 DMX outputs (5-pin)
- Splitter Pro, 1 DMX inputs, 10 DMX outputs (etherCON)
- Splitter Pro, 3 DMX inputs, 8 DMX outputs (3-pin)
- Splitter Pro, 3 DMX inputs, 8 DMX outputs (5-pin)
- Splitter Pro, 3 DMX inputs, 8 DMX outputs (etherCON)
- SPP-3-1D5D
- SPP-5-1D5D
- SPP-6-1D5D
- SPP-3-1D10D
- SPP-5-1D10D
- SPP-6-1D10D
- SPPD-3-3D8D
- SPPD-5-3D8D
- SPPD-6-3D8D
- 5060452245737
- 5060452245744
- 5060452245751
- 5060452245768
- 5060452245775
- 5060452245782
- 5060452245799
- 5060452245805
- 5060452245812