Splitter Duo Board
Splitter Duo Board is a two-channel DMX512 interface splitter. It is designed to control DMX512 based lighting equipment.
Splitter Duo Board supports DMX512, RDM (ANSI E1.20) protocols from 1, 2 or 3 inputs to 5, 4 or 2 outputs.
The unit is powered from 110/220 V AC or 9-36 V DC.
Splitter Duo Board is configured by the DIP switches installed on the unit.
The unit is designed as an enclosureless unit and can be used at positive ambient temperatures indoors and in covered areas. The unit is designed for concealed installation in manholes, recesses or enclosures of third-party equipment.
Supports RDM
Supports RDMFull RDM E1.20 support (controller/responder), bi-directional control and communication that simplify the maintenance of your lighting system
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Galvanic Isolated Ports
Galvanic Isolated PortsFull isolation of each port to create reliable protection against current surges
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
- Mechanical
Housing: no
Dimensions, mm: 100 (L) x 19 (H) x 78 (W)
Weight: 0.05 kg
Installation: stage equipment, lamps, etc.- Power & Electrical
Power supply: ~ 100-250 V, 50/60 Hz or 9-36 V
Max power consumption: 5W
Fuse: 0.5 A- Environment
Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: no
Certificates: CE compliant, RoHS
Warranty: 36 months- Control / Data Connections
Supported protocols: DMX512, RDM
Refresh rate DMX data: 44 Hz
- Inputs / Outputs
DMX inputs: 1 or 2
DMX Outputs: 4 or 5
DMX connectors: terminal blocks 15EDGVC-3.81-03,
15EDGVC-3.5-03- Configuration / Indication
Setting: DIP switches
Indicators: LED for DMX- Package Contents
Splitter Duo Board
Connector set
- Splitter Duo Board, AC
- Splitter Duo Board, DC
- SPBD-2D4D-AC
- SPBD-2D4D-DC
- 5060452246093
- 5060452246109
