Advanced Signal Amplification and Distribution Technology
IsoGate Board is a DMX512 signal amplifier and repeater for lighting control. It is designed to amplify and repeat DMX512 signals and to galvanically isolate DMX ports to protect against high voltage ingress into equipment control lines.
The unit supports DMX512 and RDM (ANSI E1.20) protocol transmissions.
Depending on the settings, the unit is powered from DC 5 V or 9-36 V.
IsoGate Board is configured with two jumpers.
The unit is designed as an enclosureless unit and can be used at positive ambient temperatures indoors and in covered areas. The unit is designed for concealed installation in manholes, recesses or enclosures of third-party equipment.
UltraStart
UltraStartReady device in less than 3 seconds after power supply
Natural Heat Convection
Natural Heat ConvectionNo fans, no coolers, no vent slots - full protection from dust
- Mechanical
Housing: No
Dimensions, mm: 58 (L) x 33 (H) x 50 (W)
Weight: 0.05 kg
Installation: stage equipment, lamps, etc.- Power & Electrical
Power supply: 5V or 9-36V
Max Power Consumption: 1W- Environment
Operating temperatures: 0 ... + 60 ° C
Storage temperatures: -50 ... + 70 ° C
Max. relative humidity: 95%
IP Rating: no
Certificates: CE compliant, RoHS
Warranty: 36 months- Control / Data Connections
Supported protocols: DMX512, RDM
Refresh rate DMX data: 44 Hz
- Inputs / Outputs
DMX ports: 2
DMX connectors: 1 XLR (3/5) M, 1 XLR (3/5) F
Galvanic isolation connectors:
terminal blocks DG306-5.0-03P- Configuration / Indication
Setting: 2 jumpers
Indicators: LED for power- Package Contents
IsoGate Board
- IsoGate Board, (3-pin)
- IsoGate Board, (5-pin)
- IGB-3-1D
- IGB-5-1D
- 5060452247106
- 5060452247113
